Contact Us
TEL: 86-010-82675282
Fax: 86-010-82675633
E-mail: susan@kaida17.com
Address: Floor 2, Building C, No. 3 courtyard, Jinbangyuan North Street, Xisanqi, Changping District, Beijing 100096, PR CHINA
Home > Knowledge > Content
How to maintain the ultrasonic thickness gauge probe
Oct 09, 2018

How to maintain the ultrasonic thickness gauge probe

Let's talk about the following, how to maintain the ultrasonic thickness gauge probe

In the regular maintenance of the ultrasonic thickness gauge, it is necessary to pay attention to the maintenance and maintenance of the probe. The probe is an important component in the ultrasonic thickness gauge, so the maintenance of the ultrasonic thickness gauge probe is particularly important.

Analysis of the indication is too large or too small. In the actual inspection work, the indication value of the thickness gauge is often significantly larger or smaller than the design value (or expected value). The reasons are as follows:

1. The probe cannot be thrown, dropped, and pulled with force.

2. When using, when the two cables of the probe are inserted and removed, the metal part of the cable should be held to prevent the probe from being broken.

3. When working in Russia, the probe should try to avoid grinding on rough and uneven surface, and the instrument prolongs the service life of the probe.

4. After the probe is used, the couplant on the probe should be wiped off in time to keep the probe clean.

Previous: The reason why the coating thickness gauge affects the measurement accuracy

Next: Ultrasonic thickness gauge tips