Contact Us
TEL: 86-010-82675282
Fax: 86-010-82675633
E-mail: susan@kaida17.com
Address: Floor 2, Building C, No. 3 courtyard, Jinbangyuan North Street, Xisanqi, Changping District, Beijing 100096, PR CHINA
Home > Knowledge > Content
Maintenance of surface roughness meter
Jan 02, 2019

Maintenance of surface roughness meter


Sensor


1) Be careful when plugging and unplugging the sensor at all times. Be careful not to touch the guide and the stylus, as this is a key part of the entire instrument. Try to hold the root of the sensor guide bracket (the front of the main body) Plug and unplug.


2) After completing the measurement work, please put the sensor into the package in time;


3) Always pay attention to the stylus part of the protection sensor.


4) The sensor is a precision component. Any phenomenon of smashing, bumping or falling may damage the sensor. This situation should be avoided as much as possible.


5) The sensor is a consumable part and is not covered by the warranty. It is only for maintenance. In order not to affect the measurement work, it is recommended that users purchase backup sensors for emergency.


2. Host


1) Pay attention to keep the surface of the main unit clean, often use a soft dry cloth to remove the surface.


Dust on;


2) This instrument is a precision measuring instrument, and should always be handled gently to avoid vibration.


3. Battery


1) Always observe the battery prompt symbol. When a low voltage occurs, please charge it in time;


2) The charging time is about three hours, try not to charge for a long time;


4. Calibration template


1) The surface of the sample should be kept clean.


2) Avoid scratching the surface of the working area of the template.


5. Troubleshooting


If the instrument fails, first deal with the measures provided by the fault information. If it still cannot be excluded, return to the manufacturer for repair. Users should not disassemble or repair it themselves. The equipment returned to the manufacturer for inspection and repair shall be accompanied by a warranty card and a standard model that is provided at random, and explain the malfunction.


Previous: Roughness meter use precautions

Next: Technical parameters of the pocket roughness meter