Contact Us
TEL: 86-010-82675282
Fax: 86-010-82675633
E-mail: susan@kaida17.com
Address: Floor 2, Building C, No. 3 courtyard, Jinbangyuan North Street, Xisanqi, Changping District, Beijing 100096, PR CHINA
Home > Knowledge > Content
Tips for coating thickness gauge
Jan 23, 2019

Tips for coating thickness gauge


The following small series to talk about the use of coating thickness gauge


1. When measuring with a coating thickness gauge, the probe must be perpendicular to the surface of the object to be tested;


2. Do not drag the probe during measurement, as this will not only cause wear on the probe, but also will not get accurate measurement results;


3. When the probe line is connected, the position of the probe should not be excessively bent and shaken (for the split coating thickness gauge), which will affect the test results, so that accurate and stable measurement results are not obtained;


4. Try to ensure that the coating thickness gauge is used and stored by a person;


Previous: Surface roughness meter measurement method

Next: How to detect surface roughness