Contact Us
TEL: 86-010-82675282
Fax: 86-010-82675633
Address: Floor 2, Building C, No. 3 courtyard, Jinbangyuan North Street, Xisanqi, Changping District, Beijing 100096, PR CHINA
Home > News > Content
Maintenance Method For Ultrasonic Flaw Detector Battery
May 10, 2018

maintenance method for Best Sale Ultrasonic Flaw Detector

1 Always use a dedicated power adapter to charge the battery of Ultrasonic Flaw Detector. If you charge the instrument with a charger that is not intended for use in your machine, the problem with the instrument is not covered by the warranty.

2 Lithium batteries have self-discharge problems. After the battery is full, if it is not used for a short time, the power will be attenuated; if it is not used for a long time, it will cause the battery to go into a dormant state. In order to protect the flaw detector and the battery, at least once every month, power on for one to two hours, and charge the battery to prevent the components inside the instrument from being affected by moisture and battery loss and affect the service life.

3 If the battery is over discharged and it cannot be charged normally (the battery is dead and the charging indicator is off), you can unplug the power adapter of the flaw detector after two minutes and then plug it in to continue charging. Repeat this operation for several times to make the battery Charging returned to normal.

4 Ultrasonic Flaw Detector battery is a consumable item. Although it can be charged and discharged hundreds of times, it will eventually fail. When you notice that the battery operating time has shortened significantly and you cannot meet the performance requirements, replace the battery with a new one.

5 Battery storage environment and charging place should avoid high temperature and humidity, and require cleanliness, must not have oil, corrosive liquid, etc., in particular, do not contact the battery positive and negative parts and metal objects.

6 Ultrasonic Flaw Detector Lithium batteries are made up of multiple units combined with special protection circuits and devices inside. It is strictly forbidden to disassemble or modify the batteries without authorization. It is forbidden to squeeze the battery and it is forbidden to short-circuit the battery. Otherwise it may cause serious consequences.

7 During the transportation and use of the battery, care should be taken to prevent excessive battery shocks and to prevent the battery from dropping, impacting, puncturing, flooding, and rain.

8 If any abnormality such as overheating occurs during the charging process, cut off the power immediately and contact your local dealer.